|
|
| ANSI B16.5 Welding Neck Flanges
USD $ 1200 |
|
Welding Neck Flanges
The Welding neck flange is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of...
|
|
|
|
|
|
| BS4504 WELDING NECK FLANGE
USD $ 1200 |
|
The slip-on flange has a low hub because the pipe slips into the flange prior to welding.
It is welded both inside and our to provide sufficient strength and prevent leakage.
Slip-on flanges are all b...
|
|
|
|
|
|
| DIN WELDING NECK FLANGES
USD $ 1200 |
|
Welding Neck Flanges
The welding neck flange is normally referred to as the "high hub".
It is designed to transfer stresses to the pipe,thereby reducing high stress concentrations at the base of the...
|
|
|
|
|
|
| THREADED FLANGE |
|
The threaded flange is similar to the slip-on flange,but the bore is threaded.
Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmo...
|
|
|
|
|
|
| LAP JOINT FLANGE |
|
The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face.
This radius is necessary to have the flange accommodate a lap ...
|
|
|
|
|
|
| BLIND FLANGE |
|
The blind flange is a flange without a bore.
It is used to close off the ends of a piping system and/or pressure vessel opening.
It also permits easy access to the interior of a line or vessel o...
|
|
|
|
|
|
|
|
|
|
|
|
